Asphalt Driveway Removal & Replacement Project in Mount Prospect, IL

This asphalt driveway replacement project in Mount Prospect, IL focuses on removing the existing driveway and installing new asphalt in the same size and shape. The work involves removing the current surface, preparing the area for replacement, and installing new asphalt to renew the driveway while maintaining its existing layout.

Because the existing driveway may have concrete underneath the asphalt, the project includes two possible scenarios. The final scope will depend on the conditions discovered during removal: one scenario applies if no concrete is present beneath the asphalt, while the other applies if an underlying concrete layer is found.

Project Goals

• Remove the existing asphalt driveway.
• Inspect the underlying conditions once the asphalt has been removed.
• Determine whether concrete is present beneath the existing asphalt.
• Replace the driveway with new asphalt in the same size and shape.
• Adapt the replacement work to the appropriate site conditions based on the discovery.

Existing Asphalt Driveway Removal

The project begins with removing the existing asphalt driveway to expose the underlying surface and prepare the area for replacement. Removing the existing material allows the condition of the driveway base and any underlying layers to be assessed before the new asphalt is installed.

An important part of this project is determining whether the driveway consists of asphalt over its base or whether a concrete layer is present underneath. Since the underlying construction is not yet confirmed, the work must account for both possibilities.

The findings during removal will determine which replacement scenario applies and help establish the appropriate next steps for the driveway installation.

Driveway Discovery: Scenario A — No Concrete Underneath

If no concrete is found beneath the existing asphalt, the project will proceed under Scenario A. The existing asphalt will be removed, and the driveway will be replaced with new asphalt in the same size and shape.

This scenario addresses the driveway replacement without the additional consideration of an underlying concrete layer. Once the existing asphalt has been removed and the exposed conditions have been assessed, the area can be prepared for the new surface according to the applicable site requirements.

Maintaining the original driveway dimensions and layout will preserve the existing footprint while providing a renewed asphalt surface.

Driveway Discovery: Scenario B — Concrete Found Underneath

If concrete is discovered beneath the existing asphalt, the project will proceed under Scenario B. The existing asphalt will still be removed, and the driveway will be replaced with new asphalt in the same size and shape, with the work accounting for the discovered concrete layer.

The presence of concrete changes the underlying conditions that must be considered during replacement. Identifying this layer during demolition is important for determining how the existing surface should be addressed before installing the new asphalt.

The replacement will maintain the existing driveway footprint, with the final approach based on the conditions uncovered during removal.

New Asphalt Installation

After the existing surface has been removed and the underlying conditions have been evaluated, the driveway will be prepared for the new asphalt installation. The replacement surface will follow the same size and shape as the existing driveway, maintaining its current layout and connection to the surrounding property.

Proper preparation is an important part of asphalt replacement because the condition of the underlying surface influences how the new material can be installed. The specific preparation requirements will depend on the conditions discovered during removal and the applicable replacement scenario.

The objective is to provide a renewed asphalt driveway while preserving the existing footprint rather than changing the driveway’s dimensions or configuration.

Why Inspecting the Existing Driveway Matters

Driveways can contain multiple layers of material from previous construction or resurfacing projects. When the underlying composition is unknown, removing the existing asphalt provides an opportunity to identify what lies beneath the visible surface.

Determining whether concrete is present helps establish the appropriate scope for the replacement work. It also prevents the project description from assuming a single set of conditions before the existing driveway has been exposed.

By accounting for both discovery scenarios, this Mount Prospect project provides a clear approach to replacing the asphalt while responding to the actual conditions found on site.

Project Highlights

• Asphalt driveway replacement in Mount Prospect, IL.
• Removal of the existing asphalt surface.
• Inspection of underlying conditions during removal.
• Two possible scenarios based on whether concrete is present beneath the asphalt.
• Scenario A: replacement when no underlying concrete is found.
• Scenario B: replacement when underlying concrete is discovered.
• Installation of new asphalt in the same size and shape as the existing driveway.
• Replacement approach determined by the conditions exposed during demolition.

As you browse through the photos, you can see the process involved in removing the existing asphalt driveway and preparing for its replacement. The discovery phase is particularly important for this project because the material beneath the asphalt will determine which replacement scenario applies.

Once the underlying conditions have been identified and the appropriate preparation is completed, the driveway will receive a new asphalt surface in its original size and shape. This project focuses on renewing the existing driveway while accounting for the uncertainty surrounding its underlying construction.

---

Please call 847.698.6868 or Contact Us

Tommy Pollina Landscape Company – serving Chicagoland since 1982.